MTN PRO Varnish 2K is a two-component (2K) polyurethane spray varnish for permanently sealing painted surfaces.

It is specially designed for final finishing of parts and repairs. This product provides long-lasting resistance to humidity and chemical agents.

Specially recommended for automotive and bicycle frame painting. 

• Easy to apply and repaint
• Completely transparent
• Non-yellowing
• Excellent levelling and shine
• Resistant to gasoline and chemicals
• Strong resistance to weathering
• Good capacity for evening out imperfections on surface
• For professional use only. The catalyst contains isocyanates
• Very easy to polish
  
  

Instructions for use

• Shake the can vigorously before use, for approximately one minute after hearing the sound of the mixer.
• Remove the red button from the lid. Turn the can 180º and place the button on the stem on the bottom side of the aerosol.
• Place the aerosol on a firm ground and press the red button with the palm of your hand.
• After activation, shake the aerosol for 2 minutes to ensure a good mixing of the product and catalyst.
• Apply on clean and dry surfaces. On already painted bilayer system surfaces, check the compatibilities in cases where using paints by other manufacturers.
• Turn the aerosol upside down to clean out the valve after use. If the nozzle becomes blocked replace it with a new one.
• Never apply to equipment that is plugged in and use in well ventilated areas. Do not breathe the aerosol vapours.
  
  **Once the 2 components have been mixed and the chemical reaction has started, the product can be used for the next 18 hours only.
  
  

MTN Pro 2K Two Component Varnish Technical Data Sheet (PDF)

*Shipping is only available in the ACT